GV/ CS-2145/ 2145DR Auto, Finger Tennor, Miter Shaper
- FEATURE
- SPECS
- DR Model with drill head for dowel hole drillng at same time.
- Fully automatic cycle function, just place the material against the stops, machine will automatic clamp, move in for shaping and drilling, come out and release the hold down.
- Fast, safe and labor saving.
- One shaper head and one drill head for the dowel at each side of the table.
- Table move from right to left by variable speed Pneumatic-Hydraulic power to achieve the fully cutting power.
- Twin table moves in and out separated for tongue and groove, end match application.
- Twin heavy-duty pneumatic pistons hold down the work pieces tightly to the table during the cutting process.
- Rigid construction on the heavy sheet metal frame, cast iron table & base for durability usage.
- Heavy duty industrial motor is suitable for heavy duty cutting under full load.
- Liner guide rails and bearings let the table moving smoothly during the cutting process.
- Cast iron fence locks in the table groove to finish 45 degree cut easily.
Specifications | GV/ CS-2145 | GV/ CS-2145DR |
---|---|---|
Max. Cutting Length | 100" (2540 mm) | |
Max. Cutting Width (45°) | 100" (2540 mm) | |
Max. Cutting Width | 13-7/9" (350 mm) | |
Spindle under Unit | 4" (102 mm) | |
Max. Cutter Size | 5" (127 mm) | |
Spindle Diameter | 1¼" (32 mm) | |
Spindle Length | 6" (152 mm) | |
Spindle Speed | 900 RPM | 9000 RPM |
Shaper Motor | 5 HP x 2 | 5 HP x 2, 1 HP x 2 |
Dust Hood Diameter | 5" x 2 (127 mm x 2) | |
Packing Size |
46" x 75" x 75" (1160 x 1900 x 1900 mm) |
46" x 91" x 75" (1160 x 2320 x 1900 mm) |