GV/ AF-08 Auto Stop/ Pusher
- With programmable controller, it can act as AUTO STOPS or AUTO PROGRAM SIZING PUSHER for mass production jobs.
- PLC controlled automatic pusher, fence device driven by servomotor active as: STOPS; Just key in the size, it will automatic moved to the position, ready for the job size and automatic finish the working cycle.
- PUSHER FENCE: Just key in all the sizes and each job’s quantities, it will move to the material length, after loaded, it pushes to the first size, automatic do the work cycle. Then it will keep going for the quantity or the next size was inputted. Continued until all the setting was finished, and then it will automatic restart again.
- Fifty sets of job data memory, extendable: printer, PC link, and unlimited memory.
- Efficiency and Accuracy for all the jobs require sizing such boring, drilling and cutting.
- Super traveling speed up to 200 feet per minute.
- Within 0.004" accuracy.
- Other lengths are available.
|Cutting Capacity||4-5/7" x 9-4/9" (120 x 240 mm)|
|Spindle Motores||7.5 HP|
|Sawblade Sizes||18" x 1" bore|
|Table Height from Floor||33-6/7" (860 mm)|
|Air Pressure||6 ~ 8 kgs/ cm²|
|Touch-sensing Screen||5-5/7" (145 mm)|
|Servo Motor (w)||400|
|Max. Memory||100 sets|
|Positioning Speed||20 ~ 50 m/ min|
|Positioning Accuracy||± 0.01" (±0.15 mm)|
|Max. Holding Force||110 LBS (50 kg)|
|Max. Pushing Force||110 LBS (50 kg)|
|Max. Feed Length||Opt. Length 3 ~ 7 M (Normal Length 2.5 ~ 6.5 M)|