GV/ S Series 4 Side Moulder
  • Hard chrome plated table for maximum wear resistance.
  • Fully enclosure safety guard reduces noise and completely prevents chips splashing.
  • Anti-impact plate for over-width and over-thickness protection.
  • Oversized top and bottom rollers run synchronized, ensuring smooth feeding.
  • FRP plastic steel safety guard features maximum durability and impact resistance.
  • The Three independent section pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect.
  • The smooth initial feeding of the stock is achieved by the independently powered infeed rollers.
  • Exclusively designed template inserted pressure plate suits various stock thickness and profile variations.
  • Special pressure plate adapted with table feeding roller design, provides smooth and precise cutting of dry and wet wood, reducing the possibility material jams.
  • Base is machined by CNC machine equipment to assure the utmost working accuracy.
  • The first bottom horizontal spindle can fit with a trimming cutter for trimming a groove at the work piece side to achieve perfect straightness.
  • The specially designed short stock feeding mechanism combined with auxiliary pressure wheels permits the machine to perform machining on extra short stocks.
  • All spindles are precision constructed and especially heat treated to provide maximum cutting stability and permanent accuracy.
  • Each spindle is provided with a mechanical digital read out, that giving accurate adjustment.
  • Every cutter spindle can be adjusts" up and down " and " in and out" for quickly setup.
  • Industrial full power motor for maximum cutting capacity.
  • Precision sealed long life high speed ball bearing.
SpecificationsGV/ S SERIES
Capacity Moulding Spindle Number 4/ 5/ 6
Working Width 5/7" ~ 9" (18 ~ 230 mm)
Working Thickness 2/9" ~ 5" (6 ~ 125 mm)
Min. Working Length 9-4/9" (240 mm)
Feed Speed 6 ~ 25 m/min
Motor 1st Bottom Horizontal Spindle 7.5 HP
2nd Right Vertical Spindle 10 HP
3rd Left Vertical Spindle 10 HP
Top Horizontal Spindle 7.5 HP
Bottom Horizontal Spindle 7.5 HP
U Spindle (OPT) 7.5 HP
Feed Drive 5 HP
Elevation ½ HP
Spindle Spindle Cutting Speed 6200 RPM
Spindle Diameter Ø1-4/7" (Ø40 mm)
Ajustment Range of Vertical Spindle 1-7/9" (45 mm)

Ajustment Range of Horizontal Spindle

1-3/8" (35 mm)
Cutting Circles 1st Bottom Horizontal Spindle Ø4" (100 mm) ~ Ø6-2/7" (160 mm)
Right Vertical Spindle Ø4" (110 mm) ~ Ø7-7/8" (200 mm)
Left Vertical Spindle Ø4-1/3" (110 mm) ~ Ø7-7/8" (200 mm)
1st Top Horizontal Spindle Ø4-1/3" (110 mm) ~ Ø7-7/8" (200 mm)
2nd Bottom Horizontal Spindle Ø4" (100 mm) ~ Ø9-5/6" (250 mm)
Feed Roller Pneumatic Pressure (Bar) 6
Diameter 5½" (140 mm)
Width 2" (50 mm)
Other Dust Outlet Diameter 5" (125 mm)
Infeed Table 78" (2M)
Cast Iron Base Yes