GV/ SP-750S 7.5 HP Super Duty Sliding Table Shaper
- INTERCHANGEABLE SPINDLES:
Choice of 4 spindle diameters- 1", 1¼", 1-3/8", 1½" or choice of metric sizes- 25mm, 30mm, 35mm, 40mm. Spindle has MK5 taper to ensure precision fitting and allow quick changeover of another spindle.
- QUICK CHANGE SPINDLE SPEEDS:
The spindle is driven by four-speed pulley for spindle speeds of 3000, 4500, 7500 and 10000 RPM. Change of speed is quickly and easily accomplished by simply loosening a lock lever, and shifting the complete assembly.
- FOOT SPINDLE LOCK:
The spindle is foot treadle locked for convenient cutter and spindle change.
- FOOT SPINDLE BRAKE:
Treadle plate provides instant stop of the running spindle after power has been turned off.
- ROUTING OPERTION:
Optional collets can be supplied to enable the shaper do a routing application. Provides excellent flexibility all in one shaping system.
- REVERSIBLE SPINDLE ROTATION:
The spindle is reversible to ensure safe rotation in clockwise or counter-clockwise direction.
- TILTING SPINDLE:
The tilting spindle provides angle cutting from -5° ~ 90° ~+45°. Spindle tilting handwheel is located at front within easy reach. A tilt scale is attached for accurate angle setting. A locking handle anchors spindle into fixed angled position.
- SPINDLE RAISING:
The spindle is raised or lowered by a graduated handwheel, providing 0.04" elevation per full revolution of the handwheel. Quick clamp lever positively holds spindle at a required setting.
- TABLE INSERTS:
The spindle is fitted with 4 insert rings permitting for use of a wide variety of shaper cutters. Maximum insert opening diameter is 13¼", allowing use of insert cutterheads.
Precision machined fence provides the accuracy demanded in complex shaping applications. The fences are supported by a massive cast iron body and integrated with a 5" cast iron dust shroud.
The massive table is made from high quality cast iron, rib reinforced, and temper heat treated for maximum strength and wear resistance. Table surface is precision ground by milling and polished to 0.05mm flatness.
1", 1¼", 1-3/8", 1-4/7"
(25.4, 30, 35, 40 mm Interchangeable)
|Spindle Travel||7" (180 mm)|
|3000/ 4500/ 7500/ 10000 RPM|
|Table Size||36-3/5" x 48" (930 x 1220 mm)|
|Sliding Table Size||13" x 48" (330 x 1220 mm)|
|Sliding Table Stroke||46" (1170 mm)|
|Table Insert Opening Diameter||
Ø4"/ 6-2/3"/ 8¼"/ 10-2/9"/ 13-2/9"
(Ø100/ 170/ 210/ 260/ 336 mm)
|Spindle Capacity under Nut||
4"/ 5½"/ 5½"/ 5½"
(102/ 140/ 140/ 140 mm)
|Table Height||35½" (900 mm)|
|Fence Size||23-5/8" x 5¾" (600 x 146 mm)|
|Motor Horsepower||7.5 HP 3 PH/ 10 HP (optional)|
|N. W.||1544 LBS (700 kg)|