GV/ CS-2145/ 2145DR Auto End Match Shaper
- DR Model with drill head for dowel hole drillng at same time.
- Fully automatic cycle function, just place the material against the stops, machine will automatic clamp, move in for shaping and drilling, come out and release the hold down.
- Fast, safe and labor saving.
- One shaper head and one drill head for the dowel at each side of the table.
- Table move from right to left by variable speed Pneumatic-Hydraulic power to achieve the fully cutting power.
- Twin table moves in and out separated for tongue and groove, end match application.
- Twin heavy-duty pneumatic pistons hold down the work pieces tightly to the table during the cutting process.
- Rigid construction on the heavy sheet metal frame, cast iron table & base for durability usage.
- Heavy duty industrial motor is suitable for heavy duty cutting under full load.
- Liner guide rails and bearings let the table moving smoothly during the cutting process.
- Cast iron fence locks in the table groove to finish 45 degree cut easily.
|Max. Cutting Length||100" (2540 mm)|
|Max. Cutting Width (45°)||100" (2540 mm)|
|Max. Cutting Width||13-7/9" (350 mm)|
|Spindle under Unit||4" (102 mm)|
|Max. Cutter Size||5" (127 mm)|
|Spindle Diameter||1¼" (32 mm)|
|Spindle Length||6" (152 mm)|
|Spindle Speed||900 RPM||9000 RPM|
|Shaper head Motor||5 HP x 2||5 HP x 2, 1 HP x 2|
|Dust Hood Diameter||5" x 2 (127 mm x 2)|
46" x 75" x 75"
(1160 x 1900 x 1900 mm)
46" x 91" x 74"
(1160 x 2320 x 1900 mm)