GV/ SFJ-250/ 300AUTO Feed Through Auto End Match
- FEATURE
- SPECS
-
- PLC control combined with touch-aensing screen for maximum convenience of operation.
-
- Each cutterhead is driven by an independent powerful motor.
-
- 7500 RPM spindle speed.
-
- Unlimited wood length.
-
- Variable feed speed.
-
- Cutter feed is controlled by a frequency inverter that permits variable speed change to suit various cutting conditions.
-
- Pressure plates are actuated by air cylinders.
-
- Hard chrome plated table features maximum wear-resistance.
-
- Table rollers increase feed smoothness.
-
- Powered infeed roller conveyor is driven by a 0.37kw motor.
-
3400 RPM infeed roller conveyor and 2200mm outfeed conveyor table are standard equipment.
- Fully enclosed splash guard.
Specifications | GV/ SFJ-250AUTO | GV/ SFJ-300AUTO | |
---|---|---|---|
Capacity | Width |
1-5/9" ~ 9-5/6" (40 ~ 250 mm) |
1-5/9" ~ 11-4/5" (40 ~ 300 mm) |
Thickness | 2/5" ~ 1-3/8" (10 ~ 35 mm) (Smaller Available) | ||
Min.Wood Length | 10-5/8" (270 mm) | ||
Max. Wood Length | Unlimited | ||
Feed | Feed Speed | 90 m/min | |
Cutting Speed | 24 m/min (Based on 2M Wood) | ||
Motors | Cutter Heads | 4 kw (5½HP) x 2pcs, 3ph. | |
Feed System | 0.75 kw (1 HP), 3 ph. | ||
Cutter Drive | 0.37 kw (½ HP), 3 ph. | ||
Electrical | Power Source | Volt as Specified 3ph, 50/ 60HZ | |
Control Voltage | 24 VDC | ||
Connected Load | 9.2 KW | ||
Other Data | Clamping | Clamp on Top and Side | |
Spindle Diameter | Ø1-4/7" (Ø40 mm) | ||
Knives | TCT Disposable Inserts | ||
Operation Control | Manual or Automatic | ||
Air Consumption | 12 CFM | ||
Machine Dimensions |
91" x 51" x 63" (2300 x 1300 x 1600 mm) |
||
Machine Weight | 2315 LBS (1050 kg) | 2536 LBS (1150 kg) |